Klargester Clearwater FS010 Forecourt Separator is a full retention separator specified to retain on site the maximum spillage likely to occur on a petrol filling station. 

 Klargester Separator Brochure

 Klargester Forecourt Separator 160mm Pipework Drawing 

 Klargester Forecourt Separator 200mm Pipework Drawing

Klargester Forecourt Separator Installation and Maintenance

The Klargester forecourt separator provides the ideal solution for potential spillages likely to occur during vehicle refuelling and road tanker delivery. 

Operation ensures that the flow cannot exit the unit without first passing through the coalescer assembly on this forecourt separator. In normal operation, the forecourt separator has sufficient capacity to provide storage for separated pollutants within the main chamber, but is also able to contain up to 7,600 litres of pollutant arising from the spillage of a fuel delivery tanker compartment on the petrol forecourt.

The forecourt separator has been designed with an automatic closure device to ensure that oil cannot exit the forecourt separator in the event of a major spillage. Subsequently the forecourt separator should be emptied immediately.

Specification

• Total capacity: 10,000 litres
• Drainage area: 555 m2
• Max. Flow rate : 10 l/s
• Access shaft: 600 mm dia
• Base to inlet invert: 2110mm
• Base to outlet invert: 2060mm
• Standard fall across unit: 50mm
• Min. inlet ivert: 400mm
• Standard pipework: 160mm

Features and Benefits

• Light and easy to install, saving you time and money
• Class I and Class II design for flexibility of choice
• Inclusive of silt storage volume
• Fitted inlet/outlet connectors
• Vent points within necks
• Extension access shafts for deep inverts
• Maintenance from ground level
• Oil storage volume
• Coalescer (Class I unit only)
• Automatic closure device
• CE-marked
• Oil Alarm System available

Installation

The forecourt separator unit should be installed on a suitable concrete base slab and surrounded with concrete or pea gravel backfill. If the forecourt separator is to be installed in a trafficked area, then a suitable cover slab must be designed to ensure that loads are not transmitted to the unit. Installation is subject to Local Authority requirements.