The Klargester FS010 Forecourt Separator is a 10,000-litre full retention oil separator specifically designed for petrol filling stations, fuel forecourts, and vehicle refuelling areas. Engineered to meet the demanding requirements of forecourt drainage systems, the FS010 safely retains and contains fuel spillages, oils, and hydrocarbons before they can enter the surface water drainage network.
This high-performance forecourt interceptor is capable of retaining the maximum likely spillage from fuel delivery operations, making it the ideal solution for petrol stations, service stations, and commercial refuelling facilities. During normal operation, all wastewater passes through an integrated coalescer assembly, ensuring effective separation of oil and fuel contaminants from surface water runoff.
In the event of a major fuel spill, the Klargester FS010 can safely contain up to 7,600 litres of fuel, equivalent to the contents of a tanker delivery compartment. An integrated automatic closure device (ACD) prevents hydrocarbons from leaving the separator, helping sites maintain environmental compliance and protecting local watercourses from pollution. Following activation, the separator should be emptied immediately by a licensed waste contractor.
Key Features & Benefits
- 10,000-litre total capacity full retention separator
- Designed specifically for petrol forecourts and refuelling facilities
- Retains up to 7,600 litres of fuel from major spillages
- Integrated coalescer technology for enhanced oil separation
- Automatic Closure Device (ACD) prevents oil discharge during major spills
- Suitable for drainage areas up to 555m²
- Lightweight yet durable construction for easier installation
- Available in Class I and Class II separator configurations
- Integral silt and oil storage volumes
- Factory-fitted inlet and outlet connectors
- Ground-level maintenance access
- Vent points incorporated within access shafts
- Extension shafts available for deep invert installations
- CE Marked for quality assurance
- Optional oil alarm monitoring system available
Typical Applications
The Klargester FS010 Full Retention Separator is suitable for:
- Petrol filling stations
- Fuel forecourts
- Service stations
- Commercial vehicle depots
- HGV and fleet refuelling facilities
- Vehicle maintenance yards
- Industrial sites handling fuels and hydrocarbons
Installation Information
The Klargester FS010 should be installed on a suitably designed concrete base slab and backfilled using either concrete or pea gravel in accordance with manufacturer recommendations. Where the separator is located within trafficked areas, an appropriate load-bearing cover slab must be incorporated to ensure vehicle loads are not transmitted directly to the tank structure.
All installations should comply with local authority requirements, current drainage regulations, and environmental best practices.
Why Choose the Klargester FS010 Forecourt Separator?
The Klargester FS010 combines reliable spill containment, high-capacity fuel storage, and advanced oil separation technology to provide a robust and compliant drainage solution for modern fuel forecourts. Its full retention design, automatic closure functionality, and substantial spill capacity make it one of the most effective separators available for protecting the environment and maintaining regulatory compliance at petrol filling stations.
Keywords: Klargester FS010, Forecourt Separator, Full Retention Separator, Petrol Interceptor, Oil Separator, Fuel Forecourt Drainage, Petrol Station Separator, Class I Separator, Hydrocarbon Separator, Fuel Spill Containment, Petrol Station Drainage System.
| Specification |
Value |
| Total Capacity |
10,000 litres |
| Maximum Flow Rate |
10 l/s |
| Drainage Area |
555 m² |
| Access Shaft Diameter |
600 mm |
| Base to Inlet Invert |
2,110 mm |
| Base to Outlet Invert |
2,060 mm |
| Fall Across Unit |
50 mm |
| Minimum Inlet Invert |
400 mm |
| Standard Pipework Connection |
160 mm |
